Expansion & Contraction Demo - Liquids




Image #2

Image #3

MPEG Movie (18 MB w/o sound)

OR 

AVI Movie (44.7 MB w/o sound)

content.gif (1503 bytes)
 Code Number :   4A20.10  

Disclaimer:

Reprinted by permission of Dick Berg, University of Maryland, for use on this website.

The demonstrations contained and referenced herein are listed for the purposes of cataloging and describing physics demonstrations which should be conducted only under the direction of a trained instructional support professional or physicist. These demonstrations are not presented for the purpose of being conducted by persons unconnected to this Facility and/or persons not consulting with or being supervised by the recognized instructional support professional or physicist and his/her staff. The University is responsible only for those demonstrations carried out using its own equipment using established safety and scheduling policies, and bears no responsibility for those choosing to use this source material for their own purposes. All demonstrations described and contained herein are public domain, and can also be found in reference materials in libraries, bookstores, and electronic sources.

Further information regarding legal liability in use of demonstrations and labs will be found on the web site Injuries in School/College Laboratories in USA.

The University of Iowa Disclaimers:  University of Iowa Disclaimer All Rights Reserved..

Condition :   Good   
Principle :   Expansion & Contraction with Temperature Variation  
Area of Study :  Heat & Fluids  
Equipment :   Bunsen burner, Gloves, Beaker (1000 mL) with water (800 mL), Flask (125 mL) with stopper & capillary, Colored water, Ring stand with asbestos pad, Matches.

Procedure :   Fill the beaker with colored water and insert the stopper with the glass tube through it.  The water level should rise in the glass tube so that you can see it above the stopper.  Apply heat and the liquid should expand and rise in the tube.  Cool the liquid and the level should go downward in the tube.

The glass air thermometer tubes are filled with colored water.  Additional water may have to be added as necessary. Heating the bulb in a water bath will expand the fluid into the tube and the expansion can be calibrated to any temperature scale. 

conbot.gif (53 bytes)

 

   References

C. T. Haywood, "Temperature and the Transfer of Heat", TPT, Vol. 14, # 6, September 1976, p. 366.

 

Ha- 9:  Freier and Anderson,  A Demonstration Handbook for Physics.

 



Mail Questions and Comments to:  Dale Stille